Toshiba Expansion Components RSIU-REF Serial Interface 1 To 4 Circuits
Business Phone Systems Toshiba Expansion Components RSIU-REF Serial Interface 1 To 4 Circuits
Home Weekly Specials Help About Us Contact Us Phone Repair Sell to Us Shopping Cart
Phones
Aastra
Allworx
Avaya
Comdial
Nortel
Panasonic
Snom
Toshiba

Phone Systems
Allworx
Avaya
Comdial
Nortel
Panasonic

Voice Mail
Avaya
Nortel
Panasonic
Toshiba

Expansion Components
Avaya
Nortel
Toshiba
Panasonic

Conference Phones
ClearOne
Konftel
Polycom

Headsets
GN Netcom
Plantronics
Sennheiser
Snom

Accessories
Cable, Jacks & Patch
Intelli Touch
Nortel
Snom
Toshiba
Viking

Toshiba RSIU-REF
Item Number: RSIU-REF
Manufacturer: Toshiba
Condition: Refurbished
Description: Serial Interface 1 To 4 Circuits
Price: 5.00

Quantity:
Product Description:

Serial Interface Card. Provides 1 serial port for DK 424 and 424i Systems. 1 RSIU per system supports up to 3 RSIS daughter cards for additional ports.

The RSIU is a standard plug-in type PCB that must be installed into the first universal slot of the DK424 base cabinet. The RSIU PCB provides one standard RS-232 port (modular jack) when ordered from the factory; this port can be configured in system programming to support any one of the hardware options listed above.

The RSIU can be equipped with up to three more optional RS-232 ports (total of four RS-232 ports) or with two optional RS-232 ports and one modem port (total of three RS-232 ports and one modem port). The optional RS-232 ports are provided by installing RSIS piggy-back PCBs onto the RSIU PCB. The optional built-in modem is provided by installing an RMDS piggy-back PCB onto the RSIU (see Figure 7-38 in Chapter 8-DK40/DK424 Universal Slot PCB Wiring).

The RSIS PCB can support any one of the hardware devices listed above via its RS-232 modular jack. The RMDS PCB can function two ways: the RMDS can operate like an RSIS allowing it to support any one of the hardware devices listed above locally from its RS-232 modular jack; or, the RMDS can operate as a 1200 bps (bits-per-second) or 2400 bps system remote maintenance modem.

The total bits-per-second (bps) data rate of the four RSIU, RSIS, RMDS (RS-232/modem) ports combined cannot exceed 9600 bps. The RSIU, RSIS RS-232 ports can be individually set in system programming to operate at 1200 bps, 4 ports max.; 2400 bps, 3 ports max.; 4800 bps, 2 ports max.; or 9600 bps, 1 port max.; or, any other combination that does not exceed 9600 bps. The RMDS modem function can be set to operate at 1200 bps or 2400 bps; however, if the RMDS port is used as a RS-232 port instead of a modem, it can also be set for 4800 bps or 9600 bps.

Manutacturer's part#, RSIU

More Toshiba Expansion Components

Toshiba Expansion Components RSIU-REF Serial Interface 1 To 4 Circuits
Copyright 2001-2009 KeyphonesDirect.com, LLC all rights reserved
last revised on September 1, 2010, 1:35 pm