| | 
| | Item Number: | VIK-K-2000-DVA | | Manufacturer: | Viking | | Condition: | New | | Description: | Multi Imput Voice Alarm Dial | | Price: | 341.00 | | Product Description:
The Viking K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000- DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to 1 minute in length specific to that input.
Messages can be recorded locally or remotely with a total message time for all 8 inputs of eight minutes. When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.
The Viking K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
Programming can be done with a Touch Tone phone or using a PC with a serial port connection and software available on the Viking website.
Viking K-200-DVA Product Brochure: (PDF)
Viking K-2000-DVA Applications:
Alarm Dialer
- Security/burglar/fire alarm notification
- System alarm or equipment malfunction notification
- Environmental warning notification
- Automatic telephone messaging paging
Store Caster
- Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc. “Customer assis- tance needed in aisle 13...”
Viking K-2000-DVA Features:
Non-volatile memory (no batteries required)
Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable as normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Compatible with the RC-2A and RC-3 remote DTMF controllers
Made in the USA
Viking K-2000-DVA Specifications:
Power: 120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
Shipping Weight: 1.02 Kg (2.25 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
Talk Battery: 12V DC
Touch Tone Dialing: 120 ms on/off, 50 ms on/off
CPC Detection Time: 320 ms minimum
Message Record Time: 8 minutes
Sampling Rate: 64 K (equivalent)
Input Detection Time: 80 ms with Qualifier Timer set to 0
Resolution Qualifier/Resume Timers: 1 second, with 18 hours maximum capacity
Connections: (1) RJ11 jack for telco connection, (1) 3.5mm jack for 600-ohm audio output, (1) 9 pin RS-232 for connection to PC, (1) 12 position screw terminal block for inputs
| More Viking Accessories |
