Viking Electronics

In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound.

Ceiling mounted Viking 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.

The Viking BLK-3-EWP provides high visibility indication of analog line status through a high powered one million candle power strobe light. The VikingBLK-3-EWP is the ideal solution for the hearing impaired and can be used equally well in loud warehouse

The Viking C-1000B allows single line phones or phone systems to share a phone line with one or two Viking doorboxes or paging amplifiers. The C-1000B provides two Touch Tone controlled relays to operate door strikes or gate openers.

The Viking C-200 allows a single line phone or phone system to share a phone line with an entry phone. Tenants may answer an entry phone call and converse with the visitor.

The Viking C-3000 Keyless Entry: Designed to address a variety of apartment entry applications, Viking C-3000 Entry System provides secure multi-tenant building access, without the need for CO lines; the only requirement is a touch-tone telephone.

The Viking CPA-7B features a low noise, high fidelity amplifier, providing 6 watts of power for a variety of telecom paging applications.

Viking's model CTG-1 is a clock controlled tone generator designed to provide accurately timed alert tones or buzzer sounds over an existing paging system.

The Viking DLE-200B Line Simulator produces two way communication between standard telecom products such as modems, fax machines, Key Systems, PABX’s and standard single line telephones. The Line Simulator can also provide sales people with a cost effe

The Viking DLE-300 Advance Line Simulator provides users with a cost effective and easy to use method of conducting on-site demonstrations, programming or diagnostics without the need to locate phone lines or disrupt customer phone service.

The Viking DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold.

The Viking DVA-500A will increase call handling capacity by answering on demand or during the first ring, and automatically adjusting the announce cycle to the message length.

The DVA-LP is an economic digital voice announcer specifically designed for applications requiring simple ring trip announcements.

We offer E-10 With Standard Weather Protection or Enhanced Weather Protection (EWP). The E-10A is a telephone line powered speaker phone designed to provide twoway handsfree communication.

The Viking K-1500-E and K-1500-EHF Emergency Telephones provide reliable emergency communication without complicated dialing procedures.

The Viking 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communication over the public switched telephone network.

The Viking E-30 handsfree phone is designed to provide quick and reliable handsfree communication and can be connected directly to a C.O. line or analog PABX/KSU station.

The E-40 Series Entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication.

The E-40 Series Entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication.

The Viking ERAM-60 adds 60 seconds of record time to one channel of the DVA-2W, DVA-1003A CE, DVA-1003B and the DVA-3003.

The Viking ES-1 is a door controller designed to operate a door strike or magnetic lock upon receiving a valid card read and/or keyless entry code from Wiegand devices. One ES-1, one or two Wiegand devices and a door strike or magnetic lock.

Even the best designed paging systems can experience feedback. Now you can eliminate annoying feedback over your paging speakers with Viking’s model FBI-1A digital antifeedback paging interface.

The HD-1 Handset Dialer is a universal keypad Touch Tone generator capable of providing DTMF signaling.

The K-1500-6 phones consist of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The entire assembly is designed to mount to a standard double gang electrical box.

The Viking K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone.

* Available in Red or Ash *

The K-1900 Series of Hot-Line phones are programmable to dial a 1-32 digit telephone number each time the phone’s handset is lifted.

The Viking K-1900-3 converts any Touch Tone phone into a multi-number auto dialer that will store up to 150 telephone numbers in non-volatile E2 memory.

The Viking K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using nonvolatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central off

The Viking K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

The Viking K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification.

The Viking K-600D eliminates the installation of multiple bells, relays and power supplies, whenever night bells, loud ringing or emergency tones are required. The Viking K-600D provides an existing paging amplifier with a pleasant electronic warble tone

The Viking K-1500P-D (desk) and Viking K-1500P-W (wall) phones features a standard wall or desk configuration with a built-in ringer. Both are available in two colors: red or ash.

The Viking LDB-2 Ring/Loop Detector monitors an analog phone line for ringing or an in-use condition. A built-in relay can be activated when either of these conditions are detected. This is ideal for monitoring line status or for providing a visual indic

The Viking LDB-3 Advanced Loop Detector monitors an analog phone line for ringing or an off hook condition. A built-in relay can be activated when either of these conditions are detected. This is ideal for monitoring line status or for providing a visual

The Viking LM-1A message waiting lamp retrofit kit is compatible with any telephone system with standard DC message waiting voltages ranging from 90VDC to 120 VDC.

Eliminate the need for dedicated lines with the LS-4x4 line scanner! Each LS-4x4 will accept one to four telephone lines and one to four devices.

The Viking LSR-1 Line Seizure Relay allows the user to share an existing phone line with an emergency phone or other priority alarm device. This can save hundreds of dollars a year over leasing a dedicated phone line.

The Viking M2W is designed to amplify the paging announcements and ringing tones of key system telephone speakers in noisy areas.

The Viking MOH-2L provides your residence or small business phones with the same 'on hold' features as Key Systems or PABX's. An audio input jack is available for providing music or promotion on hold for a truly professional 'big-business' image.

The Viking MTG-10 is a multi-tone generator designed to add multiple contact-controlled audio tones to paging systems or 600 ohm inputs.

The PA-2A provides loud ringing and paging to elec-tronic key systems, 1A2 Key systems, PABX�s as well as No-KSU phones and multiline phones.

TG1 + Mod Cord- This 7 foot Automatic Privacy Cord replaces the standard modular line cord connecting your telephone, fax machine or modem to any type of telephone line.

The Viking PI-1 Universal Telecom / Paging Interface allows you to provide paging from nearly any phone system instead of from a microphone. You can also provide background music and electronic night bell over the audio system.

The Viking RAD-AMP extends the usefulness of your phone system to remote employees, as well as providing call forwarding to remote employees or locations.

The Viking RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.

The Viking RC-3 enables a standard Touch Tone phone to control up to 3 maintained ON, maintained OFF, or momentary relay contacts from a remote location.

The Viking RG-10A ring generator is designed to increase ringing power of an existing telephone line or system extension..

Viking SO-24-AK now offers modular cords and adapters to simplify wiring when using the Viking SO-24A with digital telephones that operate on only one pair. These modular cords and adapters provide easy installation and a neat appearance to the user.

The Viking SO-24A allows supervisors to silently monitor employee phones without disrupting the activity at their worksta

The Viking SR-1 will generate loud ringing from an analog ringing line or from a dry contact closure. There are 4 different ringing sounds to choose from. Loudness is easily adjusted with a volume control knob and test button.

Viking TDR-1 is a time delay relay device designed to be easily configured to fit a wide variety of applications. The TDR-1 has two different modes of operation:

The Viking TR-1 is a cost effective, user programmable, Toll Restrictor, ideal for applications where unauthorized phone calls cannot be tolerated.

The Viking VE-3x5 adds vandal and weather resistance, as well as versatility to the E-40 Series entry phones.

The Viking VE-5x10 adds vandal resistance, as well as versatility to Viking’s flush mount, hot-line phones.

The Viking VE-5x5 adds vandal and weather resistance, as well as versatility to Viking’s doorboxes and handsfree phones.

The Viking VE-9x12 provides the ultimate in weather protection for your Viking product! Available in Red or Yellow.

The VE-GNP gooseneck pedestal is designed to be used with any of the VE-Series backboxes and is ideal for drive up communications.

The Viking VE-LIGHT kit adds bright LED illumination to any doorbox or entry phone that is housed in a Viking VE-5x5 or VE-6x7 enclosure.

When used with an analog phone line, the Viking VR-1A will provide "ring" indication, "on the phone" indication and "message waiting" indication for both "stutter dial tone" and standard message waiting voltage. In this application the VR-1A connects dir

the Viking W-1000 doorboxes are designed to interface directly with the unused trunk input of a PBX or electronic key system. For residential applications, one or two doorboxes can share a single line phone when used with Viking's C-1000B door entry cont

We offer W-2000 With Standard Weather Protection or Enhanced Weather Protection (EWP). For business, these doorboxes are designed to interface directly with the unused trunk input of a PBX or electronic key system.

We offer W-3000 With Standard Weather Protection or Enhanced Weather Protection (EWP). The W-3000 weather resistant, handsfree doorbox provides an attractive and vandal resistant stainless steel faceplate.

The Viking ZPI-4 is a four-zone Touch Tone controlled paging system capable of switching a line level signal to amplifiers or an amplified signal to speakers.