 |
Viking K-2000-DVA
Code: viking-k-2000-dva
Mfg Part #: viking-k-2000-dva
Shipping Weight: 2.25 pounds
| List Price: |
$608.00 |
| Our Price: |
$354.00 |
|
 |
|
|
Product Description:
The Viking K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000- DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to 1 minute in length specific to that input.
Messages can be recorded locally or remotely with a total message time for all 8 inputs of eight minutes. When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.
The Viking K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
Programming can be done with a Touch Tone phone or using a PC with a serial port connection and software available on the Viking website.
Viking K-200-DVA Product Brochure: (PDF)
Viking K-2000-DVA Applications:
- Alarm Dialer
- - Security/burglar/fire alarm notification
- - System alarm or equipment malfunction notification
- - Environmental warning notification
- - Automatic telephone messaging paging
- Store Caster
- - Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc. “Customer assis- tance needed in aisle 13...”
Viking K-2000-DVA Features:
- Non-volatile memory (no batteries required)
- Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
- 8 minutes of record time (1 minute per input)
- Programmable message repeat counter
- Programmable lap counter
- Eight inputs programmable as normally open or normally closed and enabled or disabled
- Programmable ring delay for remote programming and alarm polling
- Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
- Programmable resume timer for each input (time following reset for input to become active again)
- Call progress detection
- Programmable ringback limit for call progress
- Remote security and access codes
- Store caster mode
- Local or remote programming and recording
- RS-232 port for programming via a PC
- Compatible with the RC-2A and RC-3 remote DTMF controllers
- One year warranty
- Made in the USA
Viking K-2000-DVA Specifications:
- Power: 120V AC/12V DC 500 mA, UL listed adapter provided
- Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
- Shipping Weight: 1.02 Kg (2.25 lbs)
- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
- Talk Battery: 12V DC
- Touch Tone Dialing: 120 ms on/off, 50 ms on/off
- CPC Detection Time: 320 ms minimum
- Message Record Time: 8 minutes
- Sampling Rate: 64 K (equivalent)
- Input Detection Time: 80 ms with Qualifier Timer set to 0
- Resolution Qualifier/Resume Timers: 1 second, with 18 hours maximum capacity
- Connections: (1) RJ11 jack for telco connection, (1) 3.5mm jack for 600-ohm audio output, (1) 9 pin RS-232 for connection to PC, (1) 12 position screw terminal block for inputs
|
|
|
|
|
