|Description:||Digital Announcer Recorder|
The Viking DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded.
The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation.
The output of the Viking DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
The Viking DVA-2WAs non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site.
Viking DVA-2WA Applications
On-hold promotion messages and background-music
Non-volatile message repeater for...
- Museum and information displays
- Car rental "Leave the keys in the ignition..."
- Airport "Loading and unloading only..."
- Smoking "This is a non-smoking building..."
- Amusement Parks "Please keep your hands in the vehicle at all times..."
Viking DVA-2WA Features
7.5 minutes of user recordable memory
Select from user recorded messages or four pre-recorded on-hold pacifier messages
Three playback options: on demand, continuous, and timed intervals
Non-volatile memory (no batteries required)
Built-in 2 watt amplifier to connect directly to speakers
Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
600 ohm audio output for high wattage amplifiers
Multiple message capabilities (total number of messages only limited to maximum record time)
AGC (Automatic Gain Control) for trouble free recording
Auxiliary audio (MOH) input for between message background music
Remote trigger input for on-demand playback from a remote contact closure
Press and hold play mode
Status LED for record and playback indication
Master and auxiliary input volume controls
I.O. communications port (allows only one DVA-2WA to announce at a time)
Made in the USA
Viking DVA-2WA Specifications
Power: 120V AC/12V DC, 500mA adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Shipping Weight: 1.0 kg (2.2 lbs)
Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity
Frequency Response: 100-3.4KHz
Sampling Rate: 64K (equivalent) User Message
Length: 7.5 minutes maximum
Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
Speaker Output Power: 2 watt peak
Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66
Ohms: (3) 8-Ohm speaker
last revised on September 25, 2020, 4:46 pm