Made in the USA
The Viking ES-1 is a door controller designed to operate a door strike or magnetic lock upon receiving a valid card read and/or keyless entry code from Wiegand devices. One ES-1, one or two Wiegand devices and a door strike or magnetic lock of your choice is required for each entry point.
The Wiegand device used may be the Viking model HID-1 Proximity Card Reader and/or the Viking model HID-2 Wiegand Output Keypad or any other card reader, RF transmitter or digital keypad that outputs the 26 bit Wiegand format. Up to 250 valid Wiegand codes can be programmed into the ES-1.
Other programmable parameters, like relay activation and facility codes are also stored in nonvolatile memory. All programming is done with a local touch tone phone. Up to three ES-1s can be programmed simultaneously if they will be sharing all the same programming codes and parameters.
Viking ES-1 Applications
High rise apartment buildings
Senior citizen buildings
Assisted care centers
Viking ES-1 Features
Up to 250 tenants
Programmable with a Touch Tone phone
Use with any 26 bit Wiegand device
Supports 1 entry point
Compatible with Viking models HID-1 and HID-2
Non-volatile memory (no batteries required)
Viking ES-1 Specifications
Power: 120V AC/12V DC 500mA, UL listed adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75)
Shipping Weight: 1.3 kg (3 lbs)
Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% non-condensing humidity
Relay Contact Ratings: 5A @ 30V DC/250V AC maximum
Maximum Wiegand Length: 183m (500 ft) - 24 AWG
Connections: 9 screw terminals, (1) RJ-11 telco jack
last revised on September 27, 2020, 11:07 pm